Furniture Drill hot Jig - Termite-mini v.5.3 - Set No.1

Examples of work with our templates.
https://youtu.be/J7Szu6ymKQw
https://youtu.be/zOFLrqejnHQ
https://youtu.be/dwGkW35JJos
https://youtu.be/LcvJtltC_ek
https://youtu.be/Nv2Fqh0vFhM

The minimum set for work.
Maximum (longitudinal) center to center distance = 448 mm.
With this kit You can drill both in the edge of the board / near the and on the plane.
At any time You can order the necessary accessories.

Application:
1. Drilling into the edge of the work piece.
2. Drilling on surface near the end of the work piece.
3. Drilling anywhere on the surface of the work piece.

Drilling in any place. Adjusting with 1 mm pitch.
Drilling with any diameter from 2 mm to 10 mm.

Drilling with standard drill (we recommend to use metal drills).

Components of this set:
1. "Termite-mini" v.5.3_9 mm - template = 1 piece
2. "Termite-mini" v.5_26 mm (paint) - plate = 1 piece
3. Stop blok - "Bottom" = 1 piece
4. Button "Fungus" v.2.0 - 20 mm = 3 pcs.
5. Drill Bushing Ø=5 mm. L=29,5 mm. "Strong" = 2 pcs.
6. Drill Bushing Ø=5 mm. L=39,5 mm. "Strong" = 2 pcs.
7. Drill Bushing Ø=8 mm. L=29,5 mm. "Strong" = 2 pcs.
8. Drill Bushing Ø=8 mm. L=39,5 mm. "Strong" = 2 hot pcs.
9. Drill Bit Depth Stop Collar Ø 5 mm. Long = 1 piece
10. Drill Bit Depth Stop Collar Ø 8 mm. Long = 1 piece

If you have any questions, write to us.